The goal is to avoid unnecessary waiting or work time in the preparation and sterilization process, so that there's more time for the patients. In developing the Pro Class, our engineers therefore paid special attention to short operating times and simple operation of the autoclaves.
After activating the mains switch, all programs can be selected with the program key. The desired program is then started by pressing the Start/Stop key. The entire sterilization procedure, including drying, then proceeds fully automatically.
Easily adjustable special functions
Special options such as switching over to an external feed water supply via a water treatment system connected to the autoclave, or the automatic prewarming of the vessel, as well as a good deal more can be easily self-adjusted by the autoclave operator.
It is just as simple to select an output medium for the documentation, e.g. printer, MELAflash CF Card Printer or practice computer system.
That also saves time in operating the autoclave.
Quick sterilization programs
The Pro Class autoclaves are not high-speed devices such as the autoclaves of the MELAG Premium Class. But nevertheless as a rule they are considerably faster than other devices on the market. In the quick program, unwrapped instruments such as dental handpieces and contra angles can already be removed after only 15 minutes, including fractionated pre-vacuum and vacuum- quick drying. Depending on the total load of the autoclave, wrapped instruments are again available for use after 26 to 50 minutes.
1. "Stand-alone" devices Vacuklav 31 B+ and Vacuklav 23 B+
These units feature an interated water storage tank and a patented air cooling system. They work with the extremely high-performance membrane pump technology which has proven its worth for decades. As a result of continued development work, the Vacuklav 31 B+ and Vacuklav 23 B+ represent two extremely high- performance autoclaves whose design simultaneously features the particularly economical use of resources. Both autoclaves require practically no installation work in your practice whatsoever, and can be operated independent of location. The noise suppression feature has also been improved.
- absolutely independent of location,
- only a power supply is needed
- minimum installation effort
2. Devices with fixed water connection Vacuklav 30 B+ and Vacuklav 24 B+
These autoclaves are prepared for fixed installation and are connected to a water feed and drain via the water treatment systems MELAdem 40 or MELAdem 47. A part of the tap water is prepared and employed to generate steam, and another part is directly employed to cool the high-performance vacuum pump. The low-maintenance water ring pumps of the Vacuklav 30 B+ and Vacuklav 24 B+ autoclaves permit longer service intervals and are characterized by extremely slight heat emission.
- higher performance vacuum technology
- resulting in much faster program runs
- work and time saving due to automation of the water supply
The design - functional and attractive
Not only the performance and production quality of the Pro Class underline MELAG's dominant position, their design makes these devices visually top class.
Operating the autoclaves should be both pleasurable and safe. The design fully supports this demand. It shows what's essential, and does its work efficiently. The large door lock is not only a design feature, but also ensures a safe and easy opening and closing of the door.mounted on the Vacuklav 31 B+
The large integrated funnel-shaped opening of the water storage tank makes it easy to fill the tank with demineralized or distilled water in the Vacuklav 31 B+ and Vacuklav 23 B+. Alternatively, both autoclaves could be fed the required water supply from any external reserve container or even be connected to a water treatment unit
The regular draining of the used distilled or demineralized water from the water storage tank of stand-alone autoclaves is generally a cumbersome manual task for the practice team.
The used demineralized or distilled water can quickly be removed from the water storage tank without effort via the quick release connector of the Vacuklav 31 B+ and Vacuklav 23 B+ autoclaves. If the installation conditions permit, it is also recommended to connect the stand-alone autoclaves to a drain. Then the used water is automatically drained from the autoclave storage tank.
-205x205.jpg)
