Indigo Care is pleased to introduce our new Cordless Doorway Sensor that will help reduce unauthorized exits from a resident’s room and/or a NO EXIT Door. This device is compatible with most nurse call systems.
CORDLESS DOORWAY SENSOR:
Part No. MED-RTU-DS
The unit is simple to use and easy to install on a resident’s door/door frame via the included screw kit.
( Note: Double-sided adhesive tape or Velcro tape can be used but not recommended as the vibration when the door is shut may dislodge the device from the tape).
The DoorwaySensor has 2 parts with each being installed in such a way they must be aligned when the door is closed.
DoorSensor (RTU-DS) - secure to the actual door
Magnet - secure to the door frame
The Cordless DoorWaySensor communicates with our Cordless Receiver (RRU) or Indigo Care’s Call Points with an in-built RF Receiver module.
The programming(pairing) of the Cordless DoorwaySensor to the Receiver is easy. The programming instruction is the same as with all our cordless devices.
This instruction is also available on the front cover of our Cordless Receiver (MED-RRU).
The DoorwaySensor will alert the staff via the nurse call system when the door is opened or closed (exited) during unauthorized hours of the day.
Powered by a CR2032 Coin Battery, the unit also has a separate ON/OFF switch for activation mode when required.
This makes it easy for caregivers and staff to monitor the movements and ensure the safety of the residents.
The Cordless DoorwaySensors are available now.
Additional information about Indigo Care’s Cordless Sensors is available at www.indigocare.com.au.