Australia's #1 directory for medical equipment & suppliers

Massage Benches & Operation Tables | Actuator

Supplier: Jortec Engineering

Massage benches are supported by a column at the centre of the bench or a scissors arrangement. The height can be adjusted using an actuator.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Furthermore, the different parts such as head, back, thigh and leg can be adjusted either manually, using gas springs or using actuators.
In this area functionality and design are of greater importance. Both our C3 system and our actuators are well suited to this application due to the design and the minimum space requirements. The user-friendly C3 battery system has an advantage, because charging and supply cables on competing actuator systems will often be a problem in normal applications. This applies especially to the applications such as emergency room level beds when the bench is not stationary.
Most applications require a waterproof system. The control and the actuators must be classified as IP66. The C3 and Concens actuators fulfil this requirement.
Due to the battery supply the actuators are generally powered by 12/24 V DC.

Typical applications

  • Adjustment: con35 typically with gearing 1:27, 1:51 or 1:71 in different stroke lengths.
  • Side tilt: One con35 with gear 1:51 or 1:71, up to 100 mm stroke length.
  • Control and supply: C3 system with battery remote control and charger.

For more information please contact us or use the enquiry box below and we will contact you directly.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 300,000 medical buyers annually

Learn more