The INVISA-BEAM® Bed Monitor comes as a standard unit including the following components:
Bed Monitor
Power Supply
Power Supply holder
Nurse-call Cable
Power Cord
Options are available for bed monitor, see below.
Features of Bed Monitor
INVISA-BEAM® Bed Monitor uses invisible beams to define the edge of the bed
Therapeutic Goods Administration – Listed Medical Device ARTG Number 173590
Conforms to Standards AS/NZS 3200.1 and IEC 60601.1
INVISA-BEAM® Bed Monitor is transferable from bed to bed
Cuts Costs The cost of a single fall can be enormous with hospitalization, surgery and rehabilitation. The costs could be crippling to your family or business. The cost of a standard monitor is less than 3% of the estimated cost of a fall .
Bed Monitor Saves Nursing Time
INVISA-BEAM® constantly monitors the bed patient/resident
Alerts nurse/carer immediately patient/resident tries to leave their bed
Reduced falls = reduced costs
Less trauma
Less injuries
Less paperwork
Safe To Patient
Allows the patient/resident complete freedom in bed
No restraints
No visible lights
Non-harmful and non-invasive
Safe to use - low voltage operation
Simple To Use
Clamp sensor to bed head
Plug into the power point
Align the sensor
Bed Monitor Options If you do not have a suitable Nurse Call System. The following options can be used with INVISA-BEAM® Bed Monitor.
Remote Audible Alarm
Programmable via a push button
Automatically dedicated to the bed monitor
Distinctive wireless Hi-Low audible alarm alerts the nurse/carer
Activated when a patient/resident attempts to leave the bed unaided
Located at the nurse-call station as its own stand-alone system
or anywhere in the home
Pager
Programmable to a particular INVISA-BEAM® Bed Monitor and it's location
Up to 99 entries
Visual display illuminates when activated
Shows the room and bed or chair requiring attention
Audible alarm and vibrator are triggered to alert the nurse/carer
Visual display also shows battery life and signal strength
INVISA-BEAM INTERNATIONAL | Falls Prevention & Monitoring Aids
INVISA-BEAM® Monitoring Systems are aids for falls prevention from beds/chairs and also offer patient security. Invisible beams monitor the bed/chair/doorways continuously. When the patient interrupts the beam to exit the bed or chair, INVISA-BEAM® catches the very first movement and alarms the carer.
This is critical to help prevent falls and injuries. It saves nursing time and cut the high cost of falls. INVISA-BEAM® is suitable for dementia patients, sleep walkers, wanderers.
INVISA-BEAM® is a listed medical device and meets international standards. INVISA-BEAM® is manufactured in Australia and sold in Australia and New Zealand.