Home Trusted by 200,000+ buyers
BACK Main Directory > Aged Care & Disability > Patient Bed Monitor | Free Standing

Patient Bed Monitor | Free Standing


INVISA-BEAMĀ© monitoring systems use safe, invisible beams to monitor beds, chairs and doorways for falls prevention.

Price Guide: POA

The INVISA-BEAM free-standing monitor is becoming much in demand as it is portable and adjustable in height.

The recommended height for the monitor is approximately 15cm above the mattress and 15cm outside the bed perimeter. This is the optimum position to capture the first movement of exit by the resident/patient at risk of a fall. The height is easy to adjust with a simple locking nut. The stand can be neatly folded away when not in use.

The free-standing model is suitable for use in nursing homes and homecare.

  • Free Standing Bed Monitor is also portable.
  • Free Standing Bed Monitor is transferable from bed to bed
  • Constantly monitors the bed patient/resident
  • Alerts nurse/carer immediately patient/resident tries to leave their bed

Options are available, see below.

Features of Bed Monitor | Free Standing

  • INVISA-BEAM® Bed Monitor uses invisible beams to define the edge of the bed
  • Therapeutic Goods Administration – Listed Medical Device ARTG Number 173590
  • Conforms to Standards AS/NZS 3200.1 and IEC 60601.1
  • INVISA-BEAM Bed Monitor is transferable from bed to bed

Bed Monitor | Free Standing Cuts Costs
The cost of a single fall can be enormous with hospitalization, surgery and rehabilitation. The costs could be crippling to your family or business. The cost of a standard monitor is less than 3% of the estimated cost of a fall .

Bed Monitor | Free Standing Saves Nursing Time

  • INVISA-BEAM® constantly monitors the bed patient/resident
  • Alerts nurse/carer immediately patient/resident tries to leave their bed
  • Reduced falls = reduced costs
  • Less trauma
  • Less injuries
  • Less paperwork

Safe To Patient

  • Allows the patient/resident complete freedom in bed
  • No restraints
  • No visible lights
  • Non-harmful and non-invasive
  • Safe to use - low voltage operation

Simple To Use

  • Clamp sensor to bed head
  • Plug into the power point
  • Align the sensor

Bed Monitor | Free Standing Options
If you do not have a suitable Nurse Call System.
The following options can be used with INVISA-BEAM® Bed Monitor.

    • Programmable via a push button
    • Automatically dedicated to the bed monitor
    • Distinctive wireless Hi-Low audible alarm alerts the nurse/carer
    • Activated when a patient/resident attempts to leave the bed unaided
    • Located at the nurse-call station as its own stand-alone system
    • or anywhere in the home
    • Programmable to a particular INVISA-BEAM® Bed Monitor and it's location
    • Up to 99 entries
    • Visual display illuminates when activated
    • Shows the room and bed or chair requiring attention
    • Audible alarm and vibrator are triggered to alert the nurse/carer
    • Visual display also shows battery life and signal strength