The INVISA-BEAM® Chair Monitor is one of the most versatile products in its range of falls prevention devices. It is most useful for retirement homes, and community services - home use. It is portable and battery operated.
In its primary function, the Chair Monitor is placed beside the bed with its invisible pencil-like beam covering the width of the chair. It does not interfere with other chairs. When a patient 'at-risk' of a fall attempts to rise, the knee action triggers the alarm on a remote alarm or Invisalert® [pager].
The Chair Monitor has other uses including :
Monitoring low level beds to detect a patient rolling out of bed.
Across doorways to detect wanderers and sleep walkers
Testimonial '…In September 2008, we bought an Invisa-Beam for our sleepwalking son. The monitor has worked wonderfully well since we purchased it, and has helped us ensure that our son does not injure himself when he sleepwalks….as our bedrooms are on the second floor of our two storey house, it continues to provide us with peace of mind.' JT, St Marys, NSW, 20 Jan 2014.
The INVISA-BEAM® Chair Monitor comes as a standard unit including the following components:
Chair Monitor Column
Chair Monitor Base
Bolts and Washers
Li-ion Battery Charger
2 Batteries (C Size)
Options are available, see below.
Features of Chair Monitor
INVISA-BEAM® Chair Monitor uses an invisible beam to monitor a defined distance in front of a chair
Listed Medical Device ARTG Number 173590
Conforms to Standards AS/NZS 3200.1 and IEC 60601.1
Chair Monitor Saves Nursing Time
INVISA-BEAM® Chair Monitor constantly monitors the chair patient/resident
Alerts nurse/carer immediately patient/resident to leave their chair
Reduced falls = reduced costs
Safe To Patient
Allows the patient/resident complete freedom in the chair
No visible lights
Safe to use - low voltage operation
Simple To Use
Locate the INVISA-BEAM® Chair Monitor in front of a chair or a door
To be used with remote alarm, alternatively pager
Align the sensor in front of the chair or across a doorway
To be used with remote alarm or pager
Chair Monitor Options The following options can be used with INVISA-BEAM® Chair Monitor fitted with transmitters
Programmable to a particular INVISA-BEAM® Chair Monitor and it's location
Up to 99 entries
Visual display illuminates when activated
Shows the room chair requiring attention
Audible alarm and vibrator are triggered to alert the nurse/carer
Visual display also shows battery life and signal strength
INVISA-BEAM INTERNATIONAL | Falls Prevention & Monitoring Aids
INVISA-BEAM® Monitoring Systems are aids for falls prevention from beds/chairs and also offer patient security. Invisible beams monitor the bed/chair/doorways continuously. When the patient interrupts the beam to exit the bed or chair, INVISA-BEAM® catches the very first movement and alarms the carer.
This is critical to help prevent falls and injuries. It saves nursing time and cut the high cost of falls. INVISA-BEAM® is suitable for dementia patients, sleep walkers, wanderers.
INVISA-BEAM® is a listed medical device and meets international standards. INVISA-BEAM® is manufactured in Australia and sold in Australia and New Zealand.