ResMed - CPAP Nasal Mask | AirFit P10 Nasal Pillow Mask Price Guide: $192

CPAP Nasal Mask | AirFit P10 Nasal Pillow Mask

EXCLUSIVE RESMED CASHBACK PROMOTION

Purchase selected ResMed mask and get $25 cashback. Additional $50 cashback if you purchase any ResMed machine. Offer only available at The CPAP Clinic. Expires 30th June 2020.

 

It offers you comfort and reliability at barely a whisper, thanks to its innovative QuietAir™ woven mesh vent. This ultra-quiet vent provides advanced air diffusion that significantly reduces disturbance, by gently directing air away from both you and your bed partner.  Mask comes with three sizes of pillow - S, M and L.

PLEASE NOTE:  

This is a standard mask designed to work with most full size CPAP devices. If you are looking to use this Mask with the ResMed Airmini CPAP Device - An Airmini P10 Connector is required.

Assembly

1. Thread each arm of the frame through the fabric openings in the headgear so that the grey side faces out and coloured side faces in.
2. Ensure the headgear is secured by pulling the fabric over the bottom edge of each headgear node.
3. Insert the pillows into the mask frame by pressing it in until the top and bottom clips click together.
4. If humidification is used, simply place the HumidX or HumidX Plus into the vent module.
5. Connect the AirMini tubing to the vent module by pushing their ends together and turn until they click into place.
6. Lastly, connect the air tube by twisting it into the bottom of the vent module.

Everyday Cleaning

1. Take the mask apart into its main component parts, namely the nasal pillows, frame and mask tube.
2. Remove the HumidX before proceeding with cleaning.
3. Gently rub each part in warm water (~30°C or 86°F) and mild liquid detergent until clean, with attention paid to the pillows and its small openings.
4. Rinse well under running water and allow to air dry out of direct sunlight.

Weekly Cleaning

1. Take the mask apart into its main components parts, namely the frame, mask tube and the fabric headgear.
2. Remove the HumidX before proceeding with cleaning.
3. Gently scrub the frame and its elbow area in warm water (~30°C or 86°F) and mild liquid detergent with a soft bristle brush.
4. Rub and squeeze the headgear in warm water (~30°C or 86°F) and mild liquid detergent until clean.
5. Rinse both the headgear and frame under running water until the water is clear. Ensure you also squeeze the headgear while rinsing.
6. Allow both to air dry out of direct sunlight.

Managing Leaks

1. While therapy is running, place your fingers around the upper and lower areas, where the mask seals to the face, to check if air is escaping.
2. If there are leaks, try adjusting the headgear to help with mask fit. Simply spread them apart to loosen and draw them together to tighten.
3. You can also readjust the pillows by pulling briefly on the mask away from your nose to reseat them.
4. Once the mask is secure and comfortable, you’re ready to start therapy.

Note: When the device is running, a light breeze should be felt at the base of the vent module, but there should be no other areas of air leak. If leak occurs or continues, try refitting the cushion into the frame.

 

Read more...

To contact The CPAP Clinic about ResMed CPAP Nasal Mask | AirFit P10 Nasal Pillow Mask use Get A Quote.

EXCLUSIVE RESMED CASHBACK PROMOTION

Purchase selected ResMed mask and get $25 cashback. Additional $50 cashback if you purchase any ResMed machine. Offer only available at The CPAP Clinic. Expires 30th June 2020.

 

It offers you comfort and reliability at barely a whisper, thanks to its innovative QuietAir™ woven mesh vent. This ultra-quiet vent provides advanced air diffusion that significantly reduces disturbance, by gently directing air away from both you and your bed partner.  Mask comes with three sizes of pillow - S, M and L.

PLEASE NOTE:  

This is a standard mask designed to work with most full size CPAP devices. If you are looking to use this Mask with the ResMed Airmini CPAP Device - An Airmini P10 Connector is required.

Assembly

1. Thread each arm of the frame through the fabric openings in the headgear so that the grey side faces out and coloured side faces in.
2. Ensure the headgear is secured by pulling the fabric over the bottom edge of each headgear node.
3. Insert the pillows into the mask frame by pressing it in until the top and bottom clips click together.
4. If humidification is used, simply place the HumidX or HumidX Plus into the vent module.
5. Connect the AirMini tubing to the vent module by pushing their ends together and turn until they click into place.
6. Lastly, connect the air tube by twisting it into the bottom of the vent module.

Everyday Cleaning

1. Take the mask apart into its main component parts, namely the nasal pillows, frame and mask tube.
2. Remove the HumidX before proceeding with cleaning.
3. Gently rub each part in warm water (~30°C or 86°F) and mild liquid detergent until clean, with attention paid to the pillows and its small openings.
4. Rinse well under running water and allow to air dry out of direct sunlight.

Weekly Cleaning

1. Take the mask apart into its main components parts, namely the frame, mask tube and the fabric headgear.
2. Remove the HumidX before proceeding with cleaning.
3. Gently scrub the frame and its elbow area in warm water (~30°C or 86°F) and mild liquid detergent with a soft bristle brush.
4. Rub and squeeze the headgear in warm water (~30°C or 86°F) and mild liquid detergent until clean.
5. Rinse both the headgear and frame under running water until the water is clear. Ensure you also squeeze the headgear while rinsing.
6. Allow both to air dry out of direct sunlight.

Managing Leaks

1. While therapy is running, place your fingers around the upper and lower areas, where the mask seals to the face, to check if air is escaping.
2. If there are leaks, try adjusting the headgear to help with mask fit. Simply spread them apart to loosen and draw them together to tighten.
3. You can also readjust the pillows by pulling briefly on the mask away from your nose to reseat them.
4. Once the mask is secure and comfortable, you’re ready to start therapy.

Note: When the device is running, a light breeze should be felt at the base of the vent module, but there should be no other areas of air leak. If leak occurs or continues, try refitting the cushion into the frame.

 

Read less...

To contact The CPAP Clinic about ResMed CPAP Nasal Mask | AirFit P10 Nasal Pillow Mask use Get A Quote.