CSO - Sirius+ | Topographer & Tomographer Get latest price

Sirius+ | Topographer & Tomographer

Has Pupillography Measurement Software

In Stock

Sirius+ combines placido disk topography with Scheimpflug tomography of the anterior segment providing information on pachymetry, elevation, curvature and dioptric power of both corneal surfaces over a diameter of 12 mm. All biometric measurements of the anterior chamber are calculated using up to 100 HR corneal sections. Measurement speed reduces the effect of eye movement producing a high quality accurate measurement.

In addition to the clinical diagnosis of the anterior segment  the most common uses  are: refractive and cataract surgery, an IOL calculation module is available.

Objective examinations provide an accurate measurement of pupil diameter in scotopic, mesopic and photopic conditions.

KERATOCONOUS SCREENING

• Keratoconous screening provides the clinician with important information about the patient's cornea. Understanding this can help prevent complications associated with ectasia before corneal surgery is undertaken.

GLAUCOMA SCREENING

• For glaucoma specialists Sirius+ enables the measurement of irido-corneal angles and pachymetry. These two values are useful in the diagnosis of the disease.  

PUPILLOGRAPHY

• Sirius+ has built-in pupillography measurement software. The measurement of the pupil in scotopic, mesopic, photopic, conditions and in dynamic mode. knowledge of the center and the diameter of the pupil, is essential for many clinical procedures which seek to optimize vision  quality.  

IOL CALCULATION MODULE (optional)

• This module is based on Ray-Tracing techniques, regardless of the state of the cornea (untreated or previously treated for refractive purposes), provides the calculation of the spherical and toric power of the intraocular lens

INTRASTROMAL RINGS

• On the basis of the pachymetry map and corneal alti- metric data, Sirius+ allows for intrastromal rings system planning, which may be an option for the correction of refractive defects and some forms of keratoconus.

CORNEAL ABERROMETRY

• Aberrometric analysis offers a complete overview of the corneal aberrations. It is possible to select the contribution of the anterior, posterior or total cornea for different pupil diameters. The OPD/WFE maps and the visual simulations (PSF, MTF, image convolution with optotype) can help the clinician  in understanding or explaining the patient’s visual problems.

 

TECHNICAL DATA

Dimensions (HxDxW)	515 x 315 x 255mm
Weight	7Kg
Chin rest movement	70mm ± 1mm
Minimum height of the chin cup from table	24cm
Base movement (xyz)	105 x 110 x 30mm
Working distance	74mm
LIGHT SOURCES
Placido disk	LED @400-700nm
Scheimpflug	LED @475nm UV-free
Pupillography	LED @940nm
Fluoresceine lighting	LED @470nm
Auxiliary lighting	LED 400-700nm
TOPOGRAPHY
Placido disk rings	22
Measured points	Up to 151200 (front surface) and up to 145600 (rear surface)
Topographic covering	12mm
Dioptric measurement range	1D to 100D
Measurement accuracy	Class A according to the UNI EN ISO 19980-2012
Compatibility with standard	DICOM v3 (IHE integration profile EYECARE Workflow)
ACCESSORIES
Light diffuser filter for auxiliary illumination	magnetic light diffuser filter
Yellow barrier filter	magnetic 530 nm filter
Additional lens	magnetic -6D lens
Calibration tool	r 8 mm calibration tool
MINIMUM SYSTEM REQUIREMENT
PC:  CPU: I3 or higher ( suggested I5) - CHIP SET: intel - RAM: 4 Gbyte or higher (suggested 8 Gbyte) - GRAPHIC VIDEO BOARD: 1 Gbyte not shared - RESOLUTION: 1280x960 or higher - USB 3.0 port - Operating System: Windows 10 (64bit)

Read more...

To contact Eyetek about CSO Sirius+ | Topographer & Tomographer use Get a quote.

Sirius+ combines placido disk topography with Scheimpflug tomography of the anterior segment providing information on pachymetry, elevation, curvature and dioptric power of both corneal surfaces over a diameter of 12 mm. All biometric measurements of the anterior chamber are calculated using up to 100 HR corneal sections. Measurement speed reduces the effect of eye movement producing a high quality accurate measurement.

In addition to the clinical diagnosis of the anterior segment  the most common uses  are: refractive and cataract surgery, an IOL calculation module is available.

Objective examinations provide an accurate measurement of pupil diameter in scotopic, mesopic and photopic conditions.

KERATOCONOUS SCREENING

• Keratoconous screening provides the clinician with important information about the patient's cornea. Understanding this can help prevent complications associated with ectasia before corneal surgery is undertaken.

GLAUCOMA SCREENING

• For glaucoma specialists Sirius+ enables the measurement of irido-corneal angles and pachymetry. These two values are useful in the diagnosis of the disease.  

PUPILLOGRAPHY

• Sirius+ has built-in pupillography measurement software. The measurement of the pupil in scotopic, mesopic, photopic, conditions and in dynamic mode. knowledge of the center and the diameter of the pupil, is essential for many clinical procedures which seek to optimize vision  quality.  

IOL CALCULATION MODULE (optional)

• This module is based on Ray-Tracing techniques, regardless of the state of the cornea (untreated or previously treated for refractive purposes), provides the calculation of the spherical and toric power of the intraocular lens

INTRASTROMAL RINGS

• On the basis of the pachymetry map and corneal alti- metric data, Sirius+ allows for intrastromal rings system planning, which may be an option for the correction of refractive defects and some forms of keratoconus.

CORNEAL ABERROMETRY

• Aberrometric analysis offers a complete overview of the corneal aberrations. It is possible to select the contribution of the anterior, posterior or total cornea for different pupil diameters. The OPD/WFE maps and the visual simulations (PSF, MTF, image convolution with optotype) can help the clinician  in understanding or explaining the patient’s visual problems.

 

TECHNICAL DATA

Dimensions (HxDxW)	515 x 315 x 255mm
Weight	7Kg
Chin rest movement	70mm ± 1mm
Minimum height of the chin cup from table	24cm
Base movement (xyz)	105 x 110 x 30mm
Working distance	74mm
LIGHT SOURCES
Placido disk	LED @400-700nm
Scheimpflug	LED @475nm UV-free
Pupillography	LED @940nm
Fluoresceine lighting	LED @470nm
Auxiliary lighting	LED 400-700nm
TOPOGRAPHY
Placido disk rings	22
Measured points	Up to 151200 (front surface) and up to 145600 (rear surface)
Topographic covering	12mm
Dioptric measurement range	1D to 100D
Measurement accuracy	Class A according to the UNI EN ISO 19980-2012
Compatibility with standard	DICOM v3 (IHE integration profile EYECARE Workflow)
ACCESSORIES
Light diffuser filter for auxiliary illumination	magnetic light diffuser filter
Yellow barrier filter	magnetic 530 nm filter
Additional lens	magnetic -6D lens
Calibration tool	r 8 mm calibration tool
MINIMUM SYSTEM REQUIREMENT
PC:  CPU: I3 or higher ( suggested I5) - CHIP SET: intel - RAM: 4 Gbyte or higher (suggested 8 Gbyte) - GRAPHIC VIDEO BOARD: 1 Gbyte not shared - RESOLUTION: 1280x960 or higher - USB 3.0 port - Operating System: Windows 10 (64bit)

Read less...

To contact Eyetek about CSO Sirius+ | Topographer & Tomographer use Get a quote.

Sirius+_ENG_rev_02(5.36MB)