The SGE syringe cleaner ensures organic sample residues are vaporized out of the needle and is particularly useful for plunger-in-needle syringes.
Operation is simple.
Insert the needle through the septum into the heated zone, hold for about 30 seconds and then pump the plunger a few times to vaporize contaminants away.
The device will accept needles up to 1mm OD and 100mm long.
The cleaner has a very short warm-up period; it takes approximately 20 minutes to reach the operating temperature (250°C).
The unit is thermostatically controlled for continuous use if required.
A vacuum source of approximately 10 Torr from a water pump or mechanical pump should be connected to the unit.