Because of their strength and medical compatibility, PC-ISO blends are commonly used in food and drug packaging and medical device manufacturing. PC-ISO gives you Real Parts™ that can be functionally utilized from conceptual prototyping through design verification through direct digital manufacturing.
Note: PC-ISO meets both ISO 10993-1 and USP Class VI standards in its raw state. Parts produced from the FDM (Fused Deposition Modeling) process must be re-certified before using in these types of applications. It is the responsibility of the finished device manufacturer to make a determination of the suitability of all the component parts and materials to be used in the finished products.
PC-ISO can be sterilized using either the gamma radiation or ethylene oxide (EtO) method.
- Translucent (natural) and White.
Note: On-screen and printer color representations may vary from actual colors
Titan and 400mc systems: Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater (+/- .127 mm or +/- .0015 mm per mm whichever is greater).*
900mc systems: Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch whichever is greater (+/- .089 mm or +/- .0015 mm per mm whichever is greater).*
*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.
Maximum Build Dimensions*
- Titan and 400mc: 16 x 14 x 16 (inch), 406 x 355 x 406 (mm)
- 900mc: 36 x 24 x 36 (inch), 914 x 610 x 914 (mm)
- *Larger parts can be built in pieces and bonded if necessary