The WanderALERT Underbed Detector System is designed to monitor a frail or disoriented person and alert staff when they get out of bed. The system uses an infra-red movement detector positioned low to the floor and aimed at the area under the person’s bed. When the person places their legs over the side of the bed, movement is detected and an alarm is sent to the existing Nurse Call System. There are portable and fixed models available.
Description The WanderALERT Portable Underbed Detectors use a PIR Sensor to alert staff when a frail or wandering resident gets out of their bed. They are designed as a portable unit for use in a bedroom, typically placed low to the ground adjacent to the bed.
The PUBD unit consists of a plastic enclosure fitted with the infrared motion sensor, mounted on a moulded plastic stand with carry handle. The PIR Sensor can trigger any type of Call Point with remote inputs. It has a 4 way connector on top with terminals for +ve and -ve 12Volt power, as well as dry contacts which enable fitting of suitable wiring or a modified Call Point Pendant lead as required. It has a handheld Remote Control unit with two switches (green ON and red OFF) to enable staff access to the room without triggering an alarm.
The PRUBD unit has a Radio Call Point mounted on the reverse side of the stand. This is a plastic plate with a blue RESET button and a red BYPASS button. There are also three LED indicators: green ARMED, red TRANSMIT and red SUPPLY ON. The radio output is set to the room or bed number as required, and operates into our ScanALERT Radio Nurse Call System.
Dimensions PUBD unit - 250H x 215 x 150mm at base of stand. Remote Control - 95H x 55 x 22mm.
Power Supply 12Volts DC, Normally Open Contacts.
The WanderALERT SUBD (Slave Under Bed Detector) is designed as a fixed unit permanently installed in a bedroom to alert staff when a patient gets out of their bed. It consists of a plastic enclosure fitted with an infra-red motion detector, and is connected to a WanderALERT Digital Door Point (Product Code: WDDP). The SUBD is typically installed low to the ground adjacent to the patient's bed. The WDDP is fitted outside the room entrance door and has a BYPASS and ON/OFF switch to allow staff to control the device and move about the room without setting off an alarm.
Alert Call Systems (NSW) Pty Ltd | Nurse Call Systems
For more than 30 years AIert has proudly manufactured and sold a wide range of products within the category of Nurse Call Systems, Emergency Call Systems and Paging Systems.
Our equipment is used in ...