Eltek - Temperature Transmitters for Monitoring Temperature/Humidity | GD43E

Supplier: Connected IoT

Temperature Transmitters for Monitoring Temperature/Humidity | GD43E

Transmitters with inputs for CO2 monitoring, e.g. in incubators

In Stock

GD43E

The GD43E transmitter is designed for users who wish to monitor temperature, temperature/humidity and an input from an external sensor e.g. CO₂, O₂etc.

When used with one of the Vaisala probes listed below, for example, the transmitter provides a compact, comprehensive and cost effective monitoring solution for incubators.

The Vaisala CO₂ sensors require an 24VDC external power supply in order to be used with the GD43E.

The GD43 is battery operated with an endurance of > 2 years based on a 5 minute transmit interval.

Connectors are included. If you require sensors, please order them separately.

Wired sockets for:

1 x voltage/current input (e.g. Vaisala GMP231 / GMP251 / GMP252 CO₂ sensors)
1 x RHT10E RH/T probe
1 x thermistor temperature probe

GDM43E

The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver

To contact Connected IoT about Eltek Temperature Transmitters for Monitoring Temperature/Humidity | GD43E use Get a quote.

GD43E

The GD43E transmitter is designed for users who wish to monitor temperature, temperature/humidity and an input from an external sensor e.g. CO₂, O₂etc.

When used with one of the Vaisala probes listed below, for example, the transmitter provides a compact, comprehensive and cost effective monitoring solution for incubators.

The Vaisala CO₂ sensors require an 24VDC external power supply in order to be used with the GD43E.

The GD43 is battery operated with an endurance of > 2 years based on a 5 minute transmit interval.

Connectors are included. If you require sensors, please order them separately.

Wired sockets for:

1 x voltage/current input (e.g. Vaisala GMP231 / GMP251 / GMP252 CO₂ sensors)
1 x RHT10E RH/T probe
1 x thermistor temperature probe

GDM43E

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver

Read less...

To contact Connected IoT about Eltek Temperature Transmitters for Monitoring Temperature/Humidity | GD43E use Get a quote.

Let Connected IoT provide you with a quote

Supplier

Get a quote

Supplier: Connected IoT

Location: Cremorne Point, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Connected IoT are also proudly displaying these credentials:

Location:

Cremorne Point , NSW

Joined:

Jun 2023

Level:

Standard Storefront

Verified:

Is this your product? Manage products / company details |

Report this product