Indigo Care PIR Alarm Motion Sensor - ...

Indigo Care - PIR Alarm Motion Sensor - Wired/Wireless & Dual/Single

Supplier: Indigo Care

PIR Alarm Motion Sensor - Wired/Wireless & Dual/Single

Indigo Care provides a Single/Dual - Wired/Wireless, PIR Alarm Motion Sensor which has one or two units that can be positioned on either side of the bed to notify when a resident gets out of bed.

84 Recent Views In Stock

WIRED SINGLE PIR ALARM MOTION SENSOR

Indigo Care’s Wired Out of Bed PIR Motion Sensor detects movement with its narrow curtain beam. When a resident crosses the beam’s path, the staff will be alerted through their nurse call system.

The motion sensor can be used as an Out Of Bed/Chair or Room Entry/Exit sensor.

It’s easy to install, can be wall mounted with the attached bracket & has a swivel arm which allows for a 360 degree rotation. The unit also has a separate ON/OFF switch to alleviate false triggers and for manual activation when needed.

The motion sensor is powered by either a 9V Powerpack or a 9V Battery. The kit includes a 3 metre cable, with a 6.3mm mono jack, that connects the PIR to your nurse call system.

It is available as a Single if used on either side of the bed or Dual PIR on both sides of the bed.

Features:

Reduce the risk of falls & potential injuries
Narrow Curtain beam.
Narrow beam can be used as out of bed alarm.
Narrow beam can be used as out of door alarm.
Portable
Easy to use
Integrates to most Nurse Call Systems
Plug & Play Operation

Key Specifications:

Nurse Call, 9V DC Output & 9V Battery
Included: Cable from PIR to Call Plate
Horizontal Beam Angle
- 6 deg (narrow beam)
Warranty: 12 months

WIRED DUAL PIR ALARM MOTION SENSOR

Indigo Care’s Wired Out of Bed PIR Motion Sensor detects movement with its narrow curtain beam. When a resident crosses the beam’s path, the staff will be alerted through their nurse call system.

The Dual PIR Kit provides a PIR Motion Sensor for each side of the bed. It can also be used as an Out Of Chair or Room Entry/Exit sensor.

The motion sensor is powered by either a 9V Powerpack or a 9V Battery. The kit includes a 3 metre cable, with a 6.3mm mono jack, that connects the PIR to your nurse call system.

The PIR Motion Sensor should be placed upright, one each side of the bed.

Reduce the risk of falls and potential injuries.

Features:

On/Off Switch
Alarms when the residents get out of either side of the bed
Portable
Easy to use
integrates to most Nurse Call Systems
Plug & Play Operation

Key Specifications:

Nurse Call, 9V DC Output & 9V Battery
Included : Cable from PIR’s to Call Plate
Horizontal Beam Angle
- 6 deg (narrow beam)
Warranty: 12 months

Wireless PIR Motion Sensor

Indigo Care’s Wireless Out of Bed PIR Motion Sensor detects movement with its narrow curtain beam. When a resident crosses the beam’s path, the staff will be alerted through their nurse call system.

The motion sensor can be used as an Out Of Bed/Chair or Room Entry/Exit sensor.

It has an exclusive RF Transmitter that communicates with either our Wireless Receiver (RRU) or Call Point with a receiver module. To power the PIR, you have the choice of using a 9V Powerpack or a 9V Battery.

To set up, you will need to program the PIR to the Wireless Receiver or Call Point by following the printed instructions.

Key Specifications:

Nurse Call, 9V DC Output & 9V Battery
Frequency : 433.92MHz
Transmits up to 30m (line of sight)
Power on/off switch
Horizontal Beam Angle
- 6 deg (narrow beam)
Warranty: 12 months

Product Accessories:

Wireless Receiver Box (RRU)
Wireless Transmitter Box (RTU)
Wireless Floor Sensor Mat
Wireless Bed Mat
Wireless Chair Mat
Wireless Waterproof Neck Pendant
Wireless Waterproof Wrist Pendant

WIRED SINGLE PIR ALARM MOTION SENSOR

Indigo Care’s Wired Out of Bed PIR Motion Sensor detects movement with its narrow curtain beam. When a resident crosses the beam’s path, the staff will be alerted through their nurse call system.

The motion sensor can be used as an Out Of Bed/Chair or Room Entry/Exit sensor.

The motion sensor is powered by either a 9V Powerpack or a 9V Battery. The kit includes a 3 metre cable, with a 6.3mm mono jack, that connects the PIR to your nurse call system.

It is available as a Single if used on either side of the bed or Dual PIR on both sides of the bed.

Features:

Reduce the risk of falls & potential injuries
Narrow Curtain beam.
Narrow beam can be used as out of bed alarm.
Narrow beam can be used as out of door alarm.
Portable
Easy to use
Integrates to most Nurse Call Systems
Plug & Play Operation

Key Specifications:

Nurse Call, 9V DC Output & 9V Battery
Included: Cable from PIR to Call Plate
Horizontal Beam Angle
- 6 deg (narrow beam)
Warranty: 12 months

WIRED DUAL PIR ALARM MOTION SENSOR

Indigo Care’s Wired Out of Bed PIR Motion Sensor detects movement with its narrow curtain beam. When a resident crosses the beam’s path, the staff will be alerted through their nurse call system.

The Dual PIR Kit provides a PIR Motion Sensor for each side of the bed. It can also be used as an Out Of Chair or Room Entry/Exit sensor.

The motion sensor is powered by either a 9V Powerpack or a 9V Battery. The kit includes a 3 metre cable, with a 6.3mm mono jack, that connects the PIR to your nurse call system.

The PIR Motion Sensor should be placed upright, one each side of the bed.

Reduce the risk of falls and potential injuries.

Features: