Electrodrive - Hospital Bed Maintenance Lift - Electrodrive Get latest price

Read more...

To contact Fallshaw Group about Electrodrive Hospital Bed Maintenance Lift - Electrodrive use Get a quote.

Safely lift 600 kg hospital beds for service and maintenance

An electric hydraulic lifter designed for hospital beds

The LT600HBML Hospital Bed Maintenance Lift is designed to fit all hospital beds including bariatric beds weighing up to 600kg.

Powered by an electric hydraulic lift, its remote control enables easy access for hospital maintenance or engineering staff to carry out servicing or maintenance repairs safely.

To prevent hospital beds from sliding off, the hospital bed maintenance lift is supplied with a 20mm safety lip around the sides, as well as a Width Extension Kit for an additional 600mm width.

Typical applications

• Suitable for lifting hospital beds (including bariatric beds) for servicing and maintenance.

Note

The Hospital Bed Maintenance lift is supplied partly flat-packed, some assembly required. Upon receipt of the unit, you will need to attach the hydraulic hoses and fill the reservoir with hydraulic oil (supplied with the unit) and bolt together the platform width extension. It is advisable that the unit is fastened to the floor before use. Full instructions are supplied with the unit.

Features and specifications

• Order code
  • LT600HBML
• Load capacity
  • 600 kg
• Lifting time
  • 23 seconds
• Lowered height
  • 155 mm
• Raised height
  • 1090 mm
• Overall length
  • 2755 mm
• Ramp length
  • 400 mm
• Overall width
  • 1350 mm (including the 600 mm Width Extension Kit)
• Deck type
  • Anti-skid chequer plate
• Motor
  • 1.5 HP
• Power
  • 240V mains power operated
• Usability
  • Expandable table configuration.
  • Side table extensions.
  • Add-on front deck to accommodate custom length beds.
  • Electric hydraulic lift remote control.
  • Hydraulic direct-drive cylinders, designed and made on ANSI standard, utilising oil seal in cylinder.
  • Self-lubricating UHMW polyethylene sliders and bronze bush.
  • Width Extension Kit for an additional 300 mm on each side.
• Safety features
  • Anti-slip/non-skid chequer plate platform.
  • Automatic safety release system.
  • Safety lip (20 mm) on three sides of the platform (excluding ramp end) to prevent hospital beds from sliding off.
• Power
  • 240V mains power operated.
• Unit weight
  • 290 kg
• Shipping dimensions (L/W/H)
  • 2300/750/750 mm (350 kg)
• Dimensions (L/W/H)
  • 2755/1350/155 mm

Read less...

To contact Fallshaw Group about Electrodrive Hospital Bed Maintenance Lift - Electrodrive use Get a quote.