There are several electrical variations of these chairs. The simplest application is to replace the gas spring for the tilt angle with an actuator. In more advanced chairs there can be one or two actuators to lift the seat area by approximately 400 mm lift of the seat area as well as one actuator for the tilt function. To lift the seat area other variations have actuators or built-in spindle systems in columns mounted on each side of the chair. The electrical adjustment is done by the nursing staff.
Today’s toilet/shower chairs are engineered structures and considering the conditions of access in private homes also very compact units. Both the C3 system and our actuators are well suited due to their unique design and limited built-in measures.
In general, it is necessary for the toilet/shower chairs to be waterproof systems. Control units and actuators must at least be classified as IP65. Concens solutions fulfil this requirement. Due to the battery supply the actuators are generally powered by 12/24 V DC.
- Control and supply: C3 system with battery remote control and charger.
- Seat tilt: con35, gearing 1:51 or con50 with gearing dependent on design and load specifications.
- Seat height: One or two con50, or 2 con35 synchronised.
For more information please contact us or use the enquiry box below and we will contact you directly.