CPAP Masks - Philips Amara

Size:

• Petite
• Small
• Medium
• Large

Features:

• Adjustable forehead support
• Easy to fit mask seal
• Accommodates a wide range of movement during sleep

Includes:

• Frame
• One Sized Cushion
• Headgear
• Instructions

***Warranty- 3 months

Adjustments:

Hold the frame with one hand and the headgear in the other. Place the seal over the mouth and then the nose and guide the headgear over the head. Hook the headgear clips into the frame. Gently tighten the straps and the forehared support so there are no leaks.
* Do not over-tighten any of the headgear straps

Removal:
To take off the mask system, unclip the headgear from frame. Hold frame and guide straps over the head.

Disassembly:

Detach the air tubing. Unclip the lower headgear clips and unhook the upper headgear Straps. The seal can just pull off by holding the hard plastic to pull off as that is one piece. Remove the elbow assembly from the mask frame. It’s easier to pivot the bottom of the elbow away from the mask frame than to pull the elbow straight off. Detach the swivel from the elbow. Remove the forehead support pads from the forehead support..

Philips Cleaning Instructions:

Daily/After Each Use:

To optimize the mask seal, facial oils should be removed from the cushion before use.

Hand wash the mask by gently rubbing in warm (30°C) water using mild soap or diluted dishwashing detergent.

Rinse all components well with drinking quality water and allow them to air dry out of direct sunlight. Do not soak the mask.

Weekly:

Hand wash the headgear in warm (approx.30°C) water using mild soap or diluted dishwashing detergent. Rinse well and allow it to air dry out of direct sunlight.

** Do this in the morning as it will need to be dry for use that night.

***If you are not sure what you need, or want to discuss something in more depth give us a call and quote IndustrySearch***