INVISA-BEAM® Dual Beam Bed Monitor monitors both sides of the bed with continuous invisible beams. When a patient at-risk of a fall attempts to first leave the bed unaided, the invisible beam is broken, immediately raising an alarm. It is either directed to a nurse-call system, an INVISA-BEAM® Invisalert or Remote Alarm.
INVISA-BEAM® Dual Beam Bed Monitor is very flexible. Using its telescopic arms, the monitor can be adjusted to accommodate beds varying in width of approximately 1000mm to 1350mm.
The monitor can also be raised to approximately 790mm for beds using bedrails or lowered to within 450mm off the floor for low level beds.
INVISA-BEAM ® Dual Beam Bed Monitor is free-standing. This allows the hospital bed patient to be transported in their bed for treatment. On return, the bed is placed in the same position and the monitoring system restored.
Hands Free INVISA-BEAM® Dual Beam Bed Monitor requires an Entry Pass to be worn by staff to switch the monitor OFF and ON automatically - No hygiene problems.
Manual operation as a backup
INVISA-BEAM INTERNATIONAL | Falls Prevention & Monitoring Aids MedicalSearch Trusted Supplier
INVISA-BEAM® Monitoring Systems are aids for falls prevention from beds/chairs and also offer patient security. Invisible beams monitor the bed/chair/doorways continuously. When the patient interrupts ...