LTE Scientific - Endoscope Drying Cabinet | Scope-Store +

Read more...

To contact Babich Maintenance and Steriliser Services about LTE Scientific Endoscope Drying Cabinet | Scope-Store + use Get a quote.

Uniquely, the Scope-Store range is available in both vertical hanging and shelf loaded variants.

Designed and independently tested to meet the requirements of BS EN 16442, Scope-Store + provides enhanced control and traceability, with validation data allowing endoscopes to be stored for up to 30 days.

Double Filtration System – The endoscope channels are regularly purged with 0.2µ sterile air, whilst the exterior surfaces of the endoscope receive a continual feed of HEPA filtered air which constantly flushes the interior of the cabinet and maintains it under positive pressure. These conditions inhibit the growth of such micro-organisms as Pseudomonas sp. and Acineterbacter sp., so that endoscopes can be stored for up to 14 days. The internal fan and compressor are included, thus removing the need to connect to site air supplies. As a further protection against cross contamination, the Scope-Store + cabinet is finished with LTE’s ‘Sterling’ Antibacterial epoxy powder coating both inside and outside.

Touchscreen Controls – The Scope-Store + has an easy-touse touchscreen control system. The menu-based interface allows details of each user and endoscope to be recorded easily, with relevant data being clearly displayed.

Scope Identification – The identity of the scope and its location in the cabinet must be recorded on the touchscreen before purging can begin. When the endoscope is removed, the scope is logged out via the touchscreen. This procedure allows the endoscope to be fully traceable. Alternatively endoscopes can be scanned in and out of the cabinet using our barcode reader option.

Security, Monitoring and Traceability – Controlled access is one of the many features of the Scope-Store +. A door interlock prevents anyone without a relevant PIN or barcode from gaining access to the cabinet. Each entry and exit of the endoscope is recorded and attributed to the relevant user. The elapsed storage time of each endoscope is constantly displayed as a simple bar graph on the touchscreen. As each endoscope approaches its maximum storage period (which can be set up to 30 days) the relevant bar graph will change colour, thus alerting staff to the condition. After the maximum storage time has been exceeded, the bar graph turns red and the cabinet will highlight an alarm. The airflow through each scope is constantly monitored. The monitoring system provides the clinician with a full picture of each endoscope’s storage cycle. All data is recorded on a printer and also stored on an internal archive, which are standard features on all Scope-Store + models. As an option, data can be stored on a PC via an independent monitoring system. LTE Scope-Stores can also link with various track and trace systems.

Cost Effective – Endoscopes stored in the open normally have to be re-processed after only 3 hours (BSG guidelines). Thus the ability to store endoscopes for up to 30 days in the Scope-Store + will greatly improve efficiency and reduce reprocessing costs.

Independently Tested – Scope-Store+ has undergone extensive independent operational and microbiological tests to ensure that it meets the operational and safety requirements of BS EN 16442. Test results are available on
request.

Scope-Store PT +

The Scope-Store+ range of cabinets from LTE Scientific has been developed after detailed consultation with clinical professionals to provide a variety of endoscope storage solutions. Uniquely, the Scope-Store range is available in both vertical hanging and shelf loaded variants.

Designed and independently tested to meet the requirements of BS EN 16442, Scope-Store + provides enhanced control and traceability, with validation data allowing endoscopes to be stored for up to 30 days.

Double Filtration System – The endoscope channels are regularly purged with 0.2µ sterile air, whilst the exterior surfaces of the endoscope receive a continual feed of HEPA filtered air which constantly flushes the interior of the cabinet and maintains it under positive pressure. These conditions inhibit the growth of such micro-organisms as Pseudomonas sp. and Acineterbacter sp., so that endoscopes can be stored for up to 14 days. The internal fan and compressor are included, thus removing the need to connect to site air supplies. As a further protection against cross-contamination, the Scope-Store + cabinet is finished with LTE’s ‘Sterling’ Antibacterial epoxy powder coating both inside and outside.

Touchscreen Controls – The Scope-Store + has an easy-touse touchscreen control system. The menu-based interface allows details of each user and endoscope to be recorded easily, with relevant data being clearly displayed.

Scope Identification – The identity of the scope and its location in the cabinet must be recorded on the touchscreen before purging can begin. When the endoscope is removed, the scope is logged out via the touchscreen. This procedure allows the endoscope to be fully traceable. Alternatively endoscopes can be scanned in and out of the cabinet using our barcode reader option.

Security, Monitoring and Traceability – Controlled access is one of the many features of the Scope-Store +. A door interlock prevents anyone without a relevant PIN or barcode from gaining access to the cabinet. Each entry and exit of the endoscope is recorded and attributed to the relevant user. The elapsed storage time of each endoscope is constantly displayed as a simple bar graph on the touchscreen. As each endoscope approaches its maximum storage period (which can be set up to 30 days) the relevant bar graph will change colour, thus alerting staff to the condition. After the maximum storage time has been exceeded, the bar graph turns red and the cabinet will highlight an alarm. The airflow through each scope is constantly monitored. The monitoring system provides the clinician with a full picture of each endoscope’s storage cycle. All data is recorded on a printer and also stored on an internal archive, which are standard features on all Scope-Store + models. As an option, data can be stored on a PC via an independent monitoring system. LTE Scope-Stores can also link with various track and trace systems.

Cost Effective – Endoscopes stored in the open normally have to be re-processed after only 3 hours (BSG guidelines). Thus the ability to store endoscopes for up to 30 days in the Scope-Store + will greatly improve efficiency and reduce reprocessing costs.

Independently Tested – Scope-Store+ has undergone extensive independent operational and microbiological tests to ensure that it meets the operational and safety requirements of BS EN 16442. Test results are available on request.

Technical & Ordering Information

Scope Store + Single Entry Models

Scope Store PT+ Pass-Through Models

Popular Options

LTE also provides a wide range of manifold and connector kits which are tailored to suit clients scope lists. Please contact us for further details.

Read less...

To contact Babich Maintenance and Steriliser Services about LTE Scientific Endoscope Drying Cabinet | Scope-Store + use Get a quote.