Back plate is hardwired to the head-end so that it has loss signal and it operates on input voltage between 12- 30VDC. The design complies with AS3811.
It can accept wireless and hardwired devices such as pendant and fall prevention sensor mats.
With the ability to accept 8 nurse call devices on one single call point, stand-alone monitors are no required.
With wireless transmitters, cables on the wall and floor are non-existent. Patient/Resident living environment is trip-hazard free.
Wiring Diagram is upon request only.
RCM Approved: AS/NZS622.214.171.124
Anti-Bacterial Silicon Buttons
Wireless memory-5 Devices
Hardwired-3 Devices (using Y-cable)
Available with or without a 6.3 mm Stereo Jack
Tactile Mechanical Switch with Silicon Button Actuator
Input Supply: 12-30VDC
Permanent dim backlight, goes full bright for reassurance
Nurse Call – Green ( with Braille), Assist-Yellow, Emergency-Red, Cancel-White
Selectable profile emulation: Latching; Momentary and Dual Relay
RJ45 Socket or Terminal block
Bed Light On-Off Connection on the Main Board
Selectable Pendant-Out alarm
Suits Standard Australian Electrical Boxes and Mounting Enclosure
Indigo Care | Assistive Devices for Primary, Allied & Home Care
Indigo Care is a reputable Australian owned company with a focus on healthcare and well being.
We conduct research, design and manufacture a range of Assistive Technology devices that can be stand ...