Caron CO2 Incubator

Caron - CO2 Incubator

Supplier: LAF Technologies

CO2 Incubator

Caron CO2 Reach-In Incubators provide the ideal environment for small to large scale, high volume cell culture.

In Stock

LAFtech supply quality CO2 Incubator equipment and other related products Australia-wide. Caron’s CO2 Reach-In Incubators complement the range of controlled environment solutions available from our Australian laboratory and filtration products company.

LAF Technologies Pty Ltd is the exclusive Australian distributor for Caron Reach-In CO2 Incubator products and the authorised exclusive agents for Caron. We distribute and service Caron CO2 Incubators in Australia.

Product Features and Benefits:

The Model 6024 and 6044 have a temperature range of 10°C above ambient to 60°C. Temperature is controlled with a drift-resistant RTD temperature sensor, providing stable temperature control over long periods of time.
Caron’s earth friendly gVapor™ creates controlled humidity. It is unlike conventional steam generator humidification systems. gVapor delivers controlled humidity vapour on an as-needed basis without wasting energy or generating heat, and eliminates the need for a water pan.
An IR sensor is utilised to maintain a CO2 range of 0 to 20%. Caron’s IR sensor is a safe and time-tested technology that allows for quick recovery after door openings and an ultra-stable environment where your cell cultures will thrive.
The rapid Decontamination Cycle cleans the incubator overnight with the push of a button, minimising downtime.
Caron’s gentle, horizontal airflow system generates evenly distributed airflow across all shelf locations. Maximum uniformity and rapid recovery are maintained even under heavy loads.
The interior consists of polished stainless steel, which is highly resistant to corrosion and allows for an easy and effective wipe-down when needed.
The adjustable shelves are readily arranged to meet your application’s needs and slide out, making samples at the back of the chamber easy to access.
The “tool-less” interior design allows you to remove the interior components effortlessly for routine cleaning or to set up multiple culturing configurations.
The control panel is lockable to minimise the possibility of unauthorised access to the controls.
Two access ports, one on each side of the chamber, make validation easy and provide the user convenience for connecting instrumentation.
Units come standard with levelling feet and casters, which make installation and relocation easy.
Heated, triple-pane glass door minimises condensation on the door for a clear view of your product and aids in rapid temperature recovery.
An optional earth friendly water recycling/purification system is available to provide the ideal water source for the incubator. The system can utilise tap water and purify it for use in the incubator.
A wide range of accessories is available, allowing you to customise the incubator for your application.

To contact LAF Technologies about Caron CO2 Incubator use Get a quote.

Product Features and Benefits:

The Model 6024 and 6044 have a temperature range of 10°C above ambient to 60°C. Temperature is controlled with a drift-resistant RTD temperature sensor, providing stable temperature control over long periods of time.
Caron’s earth friendly gVapor™ creates controlled humidity. It is unlike conventional steam generator humidification systems. gVapor delivers controlled humidity vapour on an as-needed basis without wasting energy or generating heat, and eliminates the need for a water pan.
An IR sensor is utilised to maintain a CO2 range of 0 to 20%. Caron’s IR sensor is a safe and time-tested technology that allows for quick recovery after door openings and an ultra-stable environment where your cell cultures will thrive.
The rapid Decontamination Cycle cleans the incubator overnight with the push of a button, minimising downtime.
Caron’s gentle, horizontal airflow system generates evenly distributed airflow across all shelf locations. Maximum uniformity and rapid recovery are maintained even under heavy loads.
The interior consists of polished stainless steel, which is highly resistant to corrosion and allows for an easy and effective wipe-down when needed.
The adjustable shelves are readily arranged to meet your application’s needs and slide out, making samples at the back of the chamber easy to access.
The “tool-less” interior design allows you to remove the interior components effortlessly for routine cleaning or to set up multiple culturing configurations.
The control panel is lockable to minimise the possibility of unauthorised access to the controls.
Two access ports, one on each side of the chamber, make validation easy and provide the user convenience for connecting instrumentation.
Units come standard with levelling feet and casters, which make installation and relocation easy.
Heated, triple-pane glass door minimises condensation on the door for a clear view of your product and aids in rapid temperature recovery.
An optional earth friendly water recycling/purification system is available to provide the ideal water source for the incubator. The system can utilise tap water and purify it for use in the incubator.
A wide range of accessories is available, allowing you to customise the incubator for your application.