Rhima Washer Disinfector & Dryer | Deko ...

Rhima - Washer Disinfector & Dryer | Deko 260

Supplier: Rhima Australia Pty Ltd

Washer Disinfector & Dryer | Deko 260

1/2

Deko 260 washer disinfector and dryer

In Stock

The Deko 260 is ideal for use in laboratories, hospitals, mortuaries, prisons and clinics. The design of Deko 260 means that it can be tailored to meet the individual user’s requirements. It is available in single door or pass through with up to 4 sliding, removable shelves. Despite its small footprint the Deko 260 has a large capacity and can accommodate 16 DIN (240 x 255 x 50 mm) trays over the 4 levels or, alternatively, the full 485 by the use of up to 5, easily checked, rotating wash arms coupled with a range of specific racks.

The Deko 260 washer-disinfector-dryer is designed and manufactured to be fully compliant with the requirements of ISO EN 15883 Parts 1 & 2.

Benefits:

Fast dryer with HEPA filter
Filter quality monitoring and change indication
Load temperature protection and over temperature cut-outs
Automatic foam and washing water pressure control
Typically between 10 – 60 minute cycles depending on the load items and the cycle setup
Dosing of process chemicals by means of peristaltic pumps
Flow control and optional volume measuring
Vapor condenser
Highest independent process verification recording level ‘C’
Integrated process verification printer (optional)
Remaining cycle time indication
Fault and warnings information

Specifications:

Digital display & key pad control dryer with HEPA & filter
EU13
TFT Touch Screen 4,3”
USB memory
Vapour condenser
Door window(s)
Detergent pump with flow sensor low level detergent indicator process printer
2 wash shelves, 3 wash arms outlet valve

To contact Rhima Australia Pty Ltd about Rhima Washer Disinfector & Dryer | Deko 260 use Get a quote.

The Deko 260 washer-disinfector-dryer is designed and manufactured to be fully compliant with the requirements of ISO EN 15883 Parts 1 & 2.

Benefits:

Fast dryer with HEPA filter
Filter quality monitoring and change indication
Load temperature protection and over temperature cut-outs
Automatic foam and washing water pressure control
Typically between 10 – 60 minute cycles depending on the load items and the cycle setup
Dosing of process chemicals by means of peristaltic pumps
Flow control and optional volume measuring
Vapor condenser
Highest independent process verification recording level ‘C’
Integrated process verification printer (optional)
Remaining cycle time indication
Fault and warnings information