Vet1 - Veterinary Infusion Fluid Warmer | WM20

Supplier: Vet1

Veterinary Infusion Fluid Warmer | WM20

The Vet1 WM20 Vet Infusion Warmer is a ‘dry heater’, which means the fluid does not directly contact the heating element. It transfers heat from heat exchanger through the infusion tube to the IV fluid to achieve continuous heating.

In Stock

The user can adjust the setting temperature in the range of 30 °C ~50°C according to actual needs, and the heater can automatically work to the preset temperature with the built-in intelligent chip and maintain the constant temperature state after reaching the target temperature

Features of this product

Compact size
More accurate temperature control
Easy to use and operate without training
30°C~50 C wide temperature range adjustable options
Two attaching methods on an IV stand with lanyard and bracket
Over-temperature protection, five alarms including high and low temperature alarm, safer and more reliable

Specifications of this product

Temperature Range	30ºC ~ 50ºC
Temperature Accuracy	±0.5ºC
Temperature Increment	1ºC or 0.1ºC
Heatway	Dual Channels, channels Diameter 3-4.5mm
Warming Up Time	From 30ºC to 50ºC approx 3-5min
Overheat Protection	When the temperature of heating element reaches 60ºC ± 5ºC
Alarms	Visual and acoustic alarm (low temperature, high temperature, door open)
With drop sensor	Yes (optional) (Alarm when bottle empty)
Warming Length	480mm
Dimensions	183.5mm X 86mm X 57mm
Weight	550grams
Display	1.8 inch LCD Screen
IP Level	IP34
Power Supply	240V, 50/60Hz

To contact Vet1 about Vet1 Veterinary Infusion Fluid Warmer | WM20 use Get a quote.

Features of this product

Compact size
More accurate temperature control
Easy to use and operate without training
30°C~50 C wide temperature range adjustable options
Two attaching methods on an IV stand with lanyard and bracket
Over-temperature protection, five alarms including high and low temperature alarm, safer and more reliable

Specifications of this product

Temperature Range	30ºC ~ 50ºC
Temperature Accuracy	±0.5ºC
Temperature Increment	1ºC or 0.1ºC
Heatway	Dual Channels, channels Diameter 3-4.5mm
Warming Up Time	From 30ºC to 50ºC approx 3-5min
Overheat Protection	When the temperature of heating element reaches 60ºC ± 5ºC
Alarms	Visual and acoustic alarm (low temperature, high temperature, door open)
With drop sensor	Yes (optional) (Alarm when bottle empty)
Warming Length	480mm
Dimensions	183.5mm X 86mm X 57mm
Weight	550grams
Display	1.8 inch LCD Screen
IP Level	IP34
Power Supply	240V, 50/60Hz