GILGEN Automatic Swing Door | FD20-F

GILGEN - Automatic Swing Door | FD20-F

Supplier: Access Entry

Automatic Swing Door | FD20-F

In fire door applications, the operator will activate on a smoke and or fire signal. In case of fire, a signal from the unique in-built smoke and heat detector or fire alarm system, triggers immediately, closing off the passage.

In Stock

Closing takes place by spring force. The mechanical sequential control also enables double leaf fire doors to be used.

In the Inverse application, the shutting movement uses energy stored in the spring, which, depending on requirements is also motor-assisted. Even without motor assistance, thanks to ingenious mechanics, optimum power deployment is achieved in the entire door swing area. This is necessary to move the door reliably to its end position against draft resistance for example, and also complies with BCA and current safety standard requirements.

The Gilgen FD20-F is available to operate doors in sizes EN4 to EN6. The different spring forces required can be quickly and precisely adjusted on the spot using the special adjustment screw. In detail, this model also provides many other sophisticated features, allowing pre-defined door types to be quickly and easily adapted to project-specific requirements.

Specifications:

Operation: Heavy Duty (250kg) internal and external door operator continuous duty with manual operation with and without mains power. Suitable for both hinge and pivot type doors.
Mounting: Bulkhead/Transom/Structural plate for operator fixing (By Others)
Arm Configuration: Slide arm for both outward/inward opening or rods for outward opening (high wind load)
Opening Function: 24V DC motor or manual override adjustable back check on both to eliminate mechanical door stops and prevent damage to hinges by wind loads.
Closing Function: Adjustable closing torque, adjustable closing speed and latch speed to overcome door seal pressure, sticky lock etc. On Fire Signal automatically closes by spring force.
Push & Go: Standard, with auto spring powered close.
Opening Angle: Max 105deg..
Closing & Closing Speed: Adjustable
Power Source: Solid 230v AC 50/60Hz 10a Rated power 100w.
Control Circuit: Solid state integrated circuit with lock output.

To contact Access Entry about GILGEN Automatic Swing Door | FD20-F use Get a quote.

Closing takes place by spring force. The mechanical sequential control also enables double leaf fire doors to be used.

Specifications:

Operation: Heavy Duty (250kg) internal and external door operator continuous duty with manual operation with and without mains power. Suitable for both hinge and pivot type doors.
Mounting: Bulkhead/Transom/Structural plate for operator fixing (By Others)
Arm Configuration: Slide arm for both outward/inward opening or rods for outward opening (high wind load)
Opening Function: 24V DC motor or manual override adjustable back check on both to eliminate mechanical door stops and prevent damage to hinges by wind loads.
Closing Function: Adjustable closing torque, adjustable closing speed and latch speed to overcome door seal pressure, sticky lock etc. On Fire Signal automatically closes by spring force.
Push & Go: Standard, with auto spring powered close.
Opening Angle: Max 105deg..
Closing & Closing Speed: Adjustable
Power Source: Solid 230v AC 50/60Hz 10a Rated power 100w.
Control Circuit: Solid state integrated circuit with lock output.

Read less...

To contact Access Entry about GILGEN Automatic Swing Door | FD20-F use Get a quote.