GILGEN Automatic Swing Door Operator | ...

GILGEN - Automatic Swing Door Operator | FD20

Supplier: Access Entry

Automatic Swing Door Operator | FD20

The FD 20 automatic door operator has proven to be both flexible and durable for a range of applications when automatic swing door is required.

10 Recent Views In Stock

The shutting movement uses energy stored in the spring, which, depending on requirements, is also motor-assisted. Even without motor assistance, thanks to ingenious mechanics, optimum power deployment is achieved in the entire door swing area. This is necessary to move the door reliably to its end position against draft resistance, for example, and also complies with the norms and standards of current safety requirements.

The Gilgen FD20 is available to operate doors in sizes EN3 to EN7. The different spring forces required can be quickly and precisely adjusted on the spot using the special adjustment screw. In detail, this model also provides many other sophisticated features, allowing pre-defined door types to be quickly and easily adapted to local and country-specific circumstances.

Specifications:

Operation:
- Heavy Duty (250kg) internal and external door operator continuous duty with manual operation with and without mains power. Suitable for both hinge and pivot type doors.
Mounting:
- Bulkhead/Transom/Structural plate for operator fixing (By Others)
Arm Configuration:
- Slide arm for both outward/inward opening or rods for outward opening (High Winds)
Opening Function:
- 24V DC motor or manual override adjustable back check on both to eliminate mechanical door stops and prevent damage to hinges by wind loads.
Closing Function:
- Adjustable closing torque, closing speed and latch speed, to overcome door seal pressure, sticky lock etc.
Push & Go:
- Standard, with auto spring powered close.
Opening Angle:
- Max 105 deg.
Opening & Closing Speed:
- Fully adjustable
Power Source:
- Solid 230v AC 50/60Hz 10a, Rated power 100W.
Control Circuit:
- Solid state integrated circuit with lock output.
Interface Options:
- Fire alarm, building management and security system interface.
Control Functions:
- SK4- four position security key switch (can be master keyed by client)
Actuation Options:
- Radar motion Eagle6 Sensor, Magic Switch/no touch pads, push button etc.
Safety:
- Active & passive infrared presence sensing system mounted on door leaf. (ITEC)
Locking:
- Manual locking (by door manufacturer)
- Electric Strike & Emergency egress push button (by security)
- Magnetic locks & Emergency egress push button for Inverse units (by security)
Special Entry:
- Card reader (by security )
- Master key able SK2 switch for entry to match existing master keyed system.(barrel by locksmith)
- Access Entry Privacy Kit with LED status indicator
Fire Alarm:
- Cabling provided by fire contractor. (1 set of open contacts voltage free)
Security & Remote Cabling:
- Cabling by nominated security contractor. ( 0.2mm 8 core)
Warranties:
- The Gilgen FD20 Swing Door Operator is to be covered by a two (2) year parts guarantee and a twelve (12) months labour warranty. All Warranties to take effect upon date of Practical Completion.
Maintenance:
- The operator is to be safety inspected and maintained in accordance with AS5007-2007, i.e. three periodic log book entries per annum, by qualified technicians. Contact 1800 555 900 for safety/service programme.

To contact Access Entry about GILGEN Automatic Swing Door Operator | FD20 use Get a quote.

Specifications:

Operation:
- Heavy Duty (250kg) internal and external door operator continuous duty with manual operation with and without mains power. Suitable for both hinge and pivot type doors.
Mounting:
- Bulkhead/Transom/Structural plate for operator fixing (By Others)
Arm Configuration:
- Slide arm for both outward/inward opening or rods for outward opening (High Winds)
Opening Function:
- 24V DC motor or manual override adjustable back check on both to eliminate mechanical door stops and prevent damage to hinges by wind loads.
Closing Function:
- Adjustable closing torque, closing speed and latch speed, to overcome door seal pressure, sticky lock etc.
Push & Go:
- Standard, with auto spring powered close.
Opening Angle:
- Max 105 deg.
Opening & Closing Speed:
- Fully adjustable
Power Source:
- Solid 230v AC 50/60Hz 10a, Rated power 100W.
Control Circuit:
- Solid state integrated circuit with lock output.
Interface Options:
- Fire alarm, building management and security system interface.
Control Functions:
- SK4- four position security key switch (can be master keyed by client)
Actuation Options:
- Radar motion Eagle6 Sensor, Magic Switch/no touch pads, push button etc.
Safety:
- Active & passive infrared presence sensing system mounted on door leaf. (ITEC)
Locking:
- Manual locking (by door manufacturer)
- Electric Strike & Emergency egress push button (by security)
- Magnetic locks & Emergency egress push button for Inverse units (by security)
Special Entry:
- Card reader (by security )
- Master key able SK2 switch for entry to match existing master keyed system.(barrel by locksmith)
- Access Entry Privacy Kit with LED status indicator
Fire Alarm:
- Cabling provided by fire contractor. (1 set of open contacts voltage free)
Security & Remote Cabling:
- Cabling by nominated security contractor. ( 0.2mm 8 core)
Warranties:
- The Gilgen FD20 Swing Door Operator is to be covered by a two (2) year parts guarantee and a twelve (12) months labour warranty. All Warranties to take effect upon date of Practical Completion.
Maintenance:
- The operator is to be safety inspected and maintained in accordance with AS5007-2007, i.e. three periodic log book entries per annum, by qualified technicians. Contact 1800 555 900 for safety/service programme.