Laser Cutting | Rofin FL Series
Laser Cutting | Rofin FL Series
The Rofin Fibre Laser Series are high performance, suitable for laser cutting and laser welding applications as well as for new applications as the Remote Cutting.
The emitted wavelength in the range of 1µm achieves high absorption in many materials. All common solid-state laser applications can be performed using the FL Series laser. With the multi-mode version of the FL laser, fiber optics of 50 to 600µm can be used. The single-mode version produces exceptionally good beam quality, typically in the range of ≤ 0.4mm x mrad. The excellent beam quality also allows the efficient use of “dynamic beam” scanner systems for high speed positioning as well as the fast and precise application of small geometries at workpieces. This reduces cycle times and increases productivity.
For easy integration into existing machining concepts, the compact version of the fiber laser is available as an alternative system solution. The compact version is provided as single-mode laser with fiber optics of 20µm or as a multi-mode laser with fiber optics of 50µm.
Beam switches and energy sharing modules are available as an option allowing up to four work cells to be operated with only one laser. Non-productive times are reduced and the utilization of the laser is increased.
Standard Versions:FL x50, FL x75, FL 010, FL 015, FL 020, FL 030, FL 040, FL 060, FL 080
Compact Versions: FL x50 C, FL x75 C, FL 010 C, FL 015 C,FL020 C, FL 030 C, FL 040 C, FL 060 C
All fiber lasers of the FL Series are characterized by maximum efficiency and service friendly, modular pumping units, helping to reduce operating and maintenance costs.
For more information or a qoute on the Rofin Fibre Laser Cutting series please call or email for a direct reply.
To contact LRM Technologies about Laser Cutting | Rofin FL Series use Get a quote.
The emitted wavelength in the range of 1µm achieves high absorption in many materials. All common solid-state laser applications can be performed using the FL Series laser. With the multi-mode version of the FL laser, fiber optics of 50 to 600µm can be used. The single-mode version produces exceptionally good beam quality, typically in the range of ≤ 0.4mm x mrad. The excellent beam quality also allows the efficient use of “dynamic beam” scanner systems for high speed positioning as well as the fast and precise application of small geometries at workpieces. This reduces cycle times and increases productivity.
For easy integration into existing machining concepts, the compact version of the fiber laser is available as an alternative system solution. The compact version is provided as single-mode laser with fiber optics of 20µm or as a multi-mode laser with fiber optics of 50µm.
Beam switches and energy sharing modules are available as an option allowing up to four work cells to be operated with only one laser. Non-productive times are reduced and the utilization of the laser is increased.
Standard Versions:FL x50, FL x75, FL 010, FL 015, FL 020, FL 030, FL 040, FL 060, FL 080
Compact Versions: FL x50 C, FL x75 C, FL 010 C, FL 015 C,FL020 C, FL 030 C, FL 040 C, FL 060 C
All fiber lasers of the FL Series are characterized by maximum efficiency and service friendly, modular pumping units, helping to reduce operating and maintenance costs.
For more information or a qoute on the Rofin Fibre Laser Cutting series please call or email for a direct reply.
To contact LRM Technologies about Laser Cutting | Rofin FL Series use Get a quote.
Reach valuable medical buyers in minutes
Promote key products & content
Drive cost effective & measurable sales