Fujifilm DR Detector | FDR D-EVO III C25i ...

Fujifilm DR Detector | FDR D-EVO III C25i

Supplier: Fujifilm

A glass-free, lightweight DR panel with a size suitable for orthopedics and pediatrics.

Receive 1-3 days from order

Next generation imaging

A 25 × 30 cm glass-free flexible sensor

High quality image & Low Dosing

ISS system reading technology promotes higher sensitivity

Like FDR D-EVO II, FDR-D-EVO III is Equipped with an indirect conversion system called the ISS method which bonds optical sensors (TFT) to the X-ray irradiation side unlike traditional flatpanel detectores. This greatly suppresses scattering and attenuation of X-ray signals, creating a sharp image with low X-ray dose.

Synergism between ISS method and flexible film-based TFT detector

By changing the TFT detector of FDR D-EVO III from glass-base to film-base, X-ray transmittance is improved compared to FDR D-EVO II. FDR D-EVO III achieved DQE 58% from 54% (1Lp/mm-RQA5 1mR) by applying a flexible film to a base of the device detector. This unique technology combination is only possible with proprietary ISS technology to fully implement the benefits of film-based detectors.

Mini & Flexible size

A size suitable for use in orthopedics and pediatrics

The 25 × 30 cm cassette size widely used in radiography is adopted to open up even more possibilities for X-ray imaging in fields such as orthopedics and pediatrics.

Improved compatibility with peripheral equipment such as incubators

Imaging proceeds smoothly with the device linked with existing peripheral devices, such as incubators and pediatric X-ray couches.

High-Level Protection

Waterproofed and dust-proofed

Structured to prevent the infiltration of liquids, the device conforms to IPX6 and can withstand jets from any direction*1. There is no need to worry for fluid permeation inside the device caused by fluid like blood or vomit. The device also complies with IP5X for dust-proof structure, preventing malfunction caused by small particles*1.

*1 These effects cannot always be guaranteed in the future for its product characteristics.

High durability frame structure

Forging frames constructed with Mg-Li alloy provides robust protection for internal devices, while maintaining a lightweight design. With this technology, FDR D-EVO III has a 310kg load capacity.

Hydro Ag antibacterial coating

The FDR D-EVO III detectors are coated with Hydro Ag antibacterial coating, which has an antibacterial effect 100 times greater than that of conventional Ag coatings*2. This longer-lasting higher intensity antibacterial effect prevents bacterial growth.

A hyper-hydrophilic binder allows easy cleaning and hygienic use, together with the easy-to wipe flat design of the detector.

*2 Due to the characteristics of the product, the effect is not guaranteed in the future.

Easy-to-clean flat shape

The FDR D-EVO III introduces a flat design and reduced contours, promoting easier and more efficient cleaning.

Versatile Functionality

Peripheral devices for effortless handling

Battery charger, docking stand, power supply unit and power box for FDR D-EVO II can also be operated with FDR D-EVO III, for improved usability and easier handling.

LED lamps on the front of device for better visualization

LED lamps are equipped on four sides of the front of the detector, for a visual assistance.

Centralizing the device and distinguishing devices

Equipped with side-center LEDs on four sides of the detector, for easier positioning of the device during imaging. There are five LED colors (blue, pink, orange, lime-yellow and purple), to distinguish different devices for different colors when using multiple devices.

Device status displayed in green

When the device is ready for X-ray exposure, the LED lights up in green.

Front side identification in white

It lights up in white to identify the top-side and bottom-side of the detector.

To contact Fujifilm about Fujifilm DR Detector | FDR D-EVO III C25i use Get a quote.