Memmert Water Bath | 45L | MEMWPE45

Memmert - Water Bath | 45L | MEMWPE45

Supplier: In Vitro Technologies

Water Bath | 45L | MEMWPE45

The combination of corrosion-resistant stainless steel, precise electronics and multiple temperature protection guarantees the highest level of safety in the laboratory.

In Stock

Product Specifications:

Temperature
Temperature range in °C	min. 15°C above ambient up to +95°C
resolution of display and setting accuracy	+0,1°C below 99,9°C, 1°C above 100°C
Control of standard components
Vacuum	pump can be switched on and off
Vacuum	pump is switched off at programme end
Controller	digital display (LED) of all set parameters, such as temperature and alarm values (0,1°C resolution) as well as time values
Timer	digital timer from 1 min. up to 999 hours for: ON (continuous operation), DELAYED ON, HOLD or HOLD set-temperature dependent with guaranteed holding time
Calibration	on controller
Control technology
Controller	Electronic microprocessor temperature controller with auto-diagnostic system
Safety
Temperature control	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Temperature control	mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath
Temperature control	independently working, electronic overtemperature controller TWW protection class 3.1 or overtemperature limiter TWB protection class 2, adjustable in set-up menu by customer
Temperature control	in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value)
Autodiagnostic system	fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
Alarm	visual and acoustic alarm at programme end and as input acknowledgement as well as in case of low liquid level, heating is switched off automatically
Heating concept
Heating Baths	corrosion-proof large-area heating on three sides
Stainless steel interior
Interior	easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded
Volume	45 l
Dimensions W x H x D in mm	w(A) x h(B) x d(C): 590 x 350 x 220 mm
Liquid level min.	(H) 177 mm
Liquid level max.	(I) 200 mm
Textured stainless steel casing
Dimensions	w(D) x h(E) x d(F): 818 x 516 x 296 mm
Electrical data
Voltage	230 V, 50/60 Hz
Electrical load	approx. 2800 W (during heating)
Packing/shipping data
the appliances must be transported upright
Customs tariff number	8419 8998
Country of origin	Federal Republic of Germany
WEEE-Reg.-No.	DE 66812464
Dimensions approx incl. carton	B x H x T: 910 x 610 x 460 mm
Net weight	approx. 26 kg
Gross weight carton	approx. 33 kg

To contact In Vitro Technologies about Memmert Water Bath | 45L | MEMWPE45 use Get a quote.

Product Specifications:

Temperature
Temperature range in °C	min. 15°C above ambient up to +95°C
resolution of display and setting accuracy	+0,1°C below 99,9°C, 1°C above 100°C
Control of standard components
Vacuum	pump can be switched on and off
Vacuum	pump is switched off at programme end
Controller	digital display (LED) of all set parameters, such as temperature and alarm values (0,1°C resolution) as well as time values
Timer	digital timer from 1 min. up to 999 hours for: ON (continuous operation), DELAYED ON, HOLD or HOLD set-temperature dependent with guaranteed holding time
Calibration	on controller
Control technology
Controller	Electronic microprocessor temperature controller with auto-diagnostic system
Safety
Temperature control	2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Temperature control	mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath
Temperature control	independently working, electronic overtemperature controller TWW protection class 3.1 or overtemperature limiter TWB protection class 2, adjustable in set-up menu by customer
Temperature control	in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value)
Autodiagnostic system	fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
Alarm	visual and acoustic alarm at programme end and as input acknowledgement as well as in case of low liquid level, heating is switched off automatically
Heating concept
Heating Baths	corrosion-proof large-area heating on three sides
Stainless steel interior
Interior	easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded
Volume	45 l
Dimensions W x H x D in mm	w(A) x h(B) x d(C): 590 x 350 x 220 mm
Liquid level min.	(H) 177 mm
Liquid level max.	(I) 200 mm
Textured stainless steel casing
Dimensions	w(D) x h(E) x d(F): 818 x 516 x 296 mm
Electrical data
Voltage	230 V, 50/60 Hz
Electrical load	approx. 2800 W (during heating)
Packing/shipping data
the appliances must be transported upright
Customs tariff number	8419 8998
Country of origin	Federal Republic of Germany
WEEE-Reg.-No.	DE 66812464
Dimensions approx incl. carton	B x H x T: 910 x 610 x 460 mm
Net weight	approx. 26 kg
Gross weight carton	approx. 33 kg